3 Box Misson
You Will Need…

Box 1 – Battery Mission Box

Box 2 – Fire Mission Box

Box 3 – Alarm Mission Box

Mission Box Cable Selection Chart
For a 3 Box Mission you need “Box 1 – Box 2 Lead” and “Box 2 – Box 3 Lead”

Box 2 – With “Box 1 – Box 2 Lead” and “Box 2 – Box 3 Lead”
Preparing the Boxes
Battery Box Preparation

Box 1 – Opened

Box 1 – Insert Key in to Power Switch

Box 1 – Turn the Power Switch On – LEDs on.

Box 1 – Remove the key and check the battery voltage. Press the test button and simultaneously push the battery selector switch to position 1 & 2. (Voltage should be at least 11.5V)

Box 1 – Battery test works in the dark too!
Fire Box Preparation

Box 2 – With Box 1 to Box 2 Cable

Box 2 – Open the Fire Mission Box
If the Fire Box is being used as a Firing Box before it is used as an intermediate box make sure the Arm key is switched to fire mode. (Check out the Firing Box Mode Instructions for more details)

Box 2 – Turn the Arm Key clockwise to point to the arrow pointing to the Fire Key switch.
If the Fire Box is being used in Intermediate Box mode make sure the Arm key is switched to Arm mode.

Box 2 – Arm Key Pointing to “ARM”
Remove the key and put the “Box 1 – Box 2 Cable” in to the box and close the lid.
Alarm Box Preparation

Box 3 – Open box lid.

Box 3 – Arm Key inserted in “Safe” Position.

Box 3 – Arm Key switched to “Arm” Position.

Box 3 – Remove the Arming Key.
Taking the “Box 2 – Box 3 Cable”

Box 3 – Insert connector in to socket.

Box 3 – Cable connector inserted.
Coil the cable up and close the Alarm Box lid.
In Game Use
The three boxes are ready to be deployed in the game now.
Hide the three boxes.
Usually one box is static and the other two have to be moved next to it. Having located all three boxes and brought them together. Open them all.
Connect the Battery Box to the Fire Box

Box 1 – Battery Box Cable connection. Insert Connector

Box 1 – Inserted Connector Start Position.

Box 1 – Rotate Connector to Locked Position.

Box 2 – Insert Connector in to Fire Box.

Box 2 – Connector inserted in to Fire Box.
Connect the Fire Box to the Battery Box
Extract the free end of the cable from the Alarm box.

Box 2 -Insert Connector in to Fire Box.

Box 2 – Connector Inserted in to Fire Box.

Box 2 – Connector Inserted in to Fire Box.
Overview of the three boxes connected together

Box 1, Box 2 and Box 3 All hooked up together.

Box 1, Box 2 and Box 3 – All hooked up together. Alternative arrangement.

Box 1, Box 2 and Box 3 – All hooked up together. Powered up. Indicator Lights lit.
Arm the Fire Box

Box 2 – Lift Arm Switch Cover.

Box 2 – Switch Arm Switch On.

Box 2 – Arm Switch Armed
Finally Trigger the Alarm Box

Box 3 – Lift Alarm Switch Cover

Box 3 – Trigger the Alarm Switch

Box 3 – Alarm Switch Triggered
The switch is momentary so will switch itself off once switched. The alarm sounders and xenon beacon are on a timer and will switch off after a few seconds.
Game over!